BASIC Stamp 2pe ModuleThe BASIC Stamp 2pe serves as the brains inside of electronics projects and applications that require a programmable microcontroller. It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC. All vital components (processor, clock source, memory, power regulator) are provided on the BS2pe's tiny PCB; just connect power and go! Projects needing small, permanent soldering area for circuitry may benefit from combining the BS2pe-IC with the BASIC Stamp 2 Carrier Board (#27120) or the Super Carrier Board (#27130). The BS2pe-IC is useful for those that have previous experience with the BS2p and are building battery-powered or data logging applications. The execution speed is slower than the BS2p and the wake-up interval is less that 1 ms, so battery life is extended significantly. For customers that require true multi-processing or video generation, we highly recommend the Propeller microcontroller.Features Processor Speed: 8 MHz Turbo Program Execution Speed: 6,000 PBASIC instructions/sec. (approx.) RAM Size: 38 Bytes (12 I/0, 26 Variable) Scratch Pad RAM: 128 bytes EEPROM (Program) Size: 16 x 2 KBytes; (16 K for source; approx. 4,000 PBASIC instructions) Number of I/O Pins: 16 2 dedicated serial Current Draw @ 5 VDC: 15mA Run, 150 &mirco;A Sleep Source/Sink Current per I/O: 30 mA / 30 mA Source/Sink Current per unit: 60 mA / 60 mA per 8 I/O pins PBASIC Commands: 61 Package: 24-pin DIP Commercial-Rated since Rev. BSpecifications Power Requirements: 5.5 to 12 VDC (Vin), or 5 VDC (Vdd) Communication: Serial (9600 baud for programming) Dimensions: 1.20 x 0.63 x 0.15 in (30.0 x 16.0 x 3.81 mm) Operating Temperature: 32 to 158F (0 to 70C)
|