Arty S7-50T: Spartan-7 FPGA Board for Hobbyists and Makers Vivado Design Suite voucher not included - Vivado Design Suite Edition is available for free download (Vivado WebPACK). The Arty S7 board features new Xilinx Spartan-7 FPGA and is the latest member of the Arty family for Makers and Hobbyists. The Spartan-7 FPGA offers the most size, performance, and cost-conscious design engineered with the latest technologies from Xilinx. Putting this FPGA in the Arty form factor provides users with a wide variety of I/O and expansion options. Use the dual row Arduino connectors to mount one of the hundreds of hardware compatible shields available, or use the Pmod ports with Digilent's pre-made Pmod IP blocks for a more streamlined design experience. Arty S7 was designed to be MicroBlaze ready and comes out of the box ready to use with Xilinx's WebPACK licensing. Arty S7 Block Diagram Note: The official distribution channel for the Arty S7 board is through Avnet and Digilent only. For this reason, we cannot provide distributor discounts for the Arty S7 board. Features Internal clock speeds exceeding 450MHz; On-chip analog-to-digital converter (XADC). Programmable over JTAG and Quad-SPI Flash 256 MB DDR3L with a 16-bit bus @ 650 MHz 128 Mbits Quad-SPI Flash 100 MHz External Clock USB-JTAG Programming circuitry (USB Micro cable required, NOT INCLUDED). Powered from USB or any 7V-15V source USB-UART Bridge 4 Switches 4 Buttons 1 Board Reset Button 1 FPGA Reset Button 4 Green LEDs 2 RGB LEDs 4 Pmod connectors Arduino/chipKIT Shield connector Specifications 1 MSPS On-chip ADC: Yes Logic Cells: 52,160 Slices: 8,150 Flip-Flops: 65,200 Block RAM (Kbits): 2,700 Clock Management Tiles: 5 DSP Slices: 120 Resources & Downloads User's Manual Page (off-site) Pinout Spreadsheet (.xlsx) Resource Center
|
