1.8 inch TFT LCD Display Module with PCB for Arduino ST7735R SPI 128x160 Features: Can help you to get rid of the Arduino serial monitor. Supports UTFT library, AdaFruit Library and instruction on DropBox. Tested with Latest Arduino 1.6.5. Specifications Driver IC: ST7735R Resolution: 128 x 160 pixels SPI interface IO interface: 1. RESET --directly to the microcontroller IO 2. CS --directly to the microcontroller IO 3. A0 --IO control registers select 4. SDA --IO control data transmission 5. SCL --IO control SPI bus 6. BL--High Level 3.3V backlight on Note: Please contact us for documents and driver if you need. Please note this LCD is 3.3V, which cannot receive 5V signals from the Arduino, so please use a 1k series resistors between GPIO lines on a 5V Arduino and this LCD, power this LCD with 5V but drive it with 'level shifted resistor' GPIO lines. Besides, you could use mcifriend 2.8 inch TFT LCD library to get it to work, it will work fine with the Mega or Uno.
|